Stair Railing Bracket

Our Heavy Duty Wall-Rail bracket is normally used in hallways or stairwells. Has a rigid mounting plate and provides an elegant look to residential properties. Installation is quick and easy, simply find a stud (use a stud finder to locate the center of each stud), pivot bracket to the proper handrail angle and then fasten the bracket to the wall.

• 2-3/4" from wall to center of rail
• Rail mounting plate has two 5/16" holes 
• Height: 3-3/8" - Width: 3-3/16"
• Round Base Diameter: 2-1/16"

DON'T LEAVE RAILING ENDS EXPOSED, BY CODE THEY NEED TO RETURN TO THE WALL.

Handrails need to meet the wall at each end. These "returns" alert people that the railing has ended. Returns also protect folks from bumping into a sharp edge of the rail.

** Always drill pilot holes first before driving in any bracket screws. Without a pilot hole, it’s possible that you could break/strip the screws with all the pressure of the wood squeezing onto the screw as you drive it in **

Note: Consult your local building code for specific requirements.

Wall rail brackets should be installed every 48” on center average. Use 3 brackets per each 8' section. 

If you can’t find the product you are looking for, need additional assistance or have any questions, please contact our sales team at (844) 578-2477 or e-mail us sales@affordablestairparts.com 

We are happy to answer any questions you may have about our stair products, installation or help you place an order.